Tuesday, March 28, 2017

DOES IT SEEM LIKE YOUR GARAGE DOOR HAS A MIND OF ITS OWN? HERE’S WHAT TO DO!

Does your garage door open and shut randomly? There are a number of common reasons this is happening:

  1. Test the transmitter frequency. Your neighbor’s remote has perhaps inadvertently been programmed to the same exact frequency as yours. If so, first erase the remote control from the memory of your garage door opener, and then reprogram the remote control and keyless entry.
  2. Look at the transmitter. It could be wedged under something that accidentally depressed your remote control mechanism. In other words, somewhere, there’s a button stuck. The transmitter might be sitting under some things you forgot you left in your car, or under something else you left nearby. If the LED light by the learn button is continually flashing, then your garage door opener is getting a steady signal from the remote control. (You’ll find the learn button above the antenna wire that’s hanging from the motor head, or underneath the light cover. It’s either green, red, orange, purple, or yellow.) Remove the batteries from your remote, and if the light stops flashing, then the issue is a stuck button.
  3. If neither of these is the problem, you may have a short in the wall-mounted door control, which means that unwanted signals are being sent to the garage door opener or to the logic board (i.e., the circuit board).
  • If the garage door opener activates all by itself while the wall-mounted door control panel wires are disconnected, you’ll likely need to replace the receiver logic board.
  • If the opener does not activate by itself while the wall-mounted door control panel is disconnected, then, in all probability, the answer is to replace the wires to your wall-mounted door control panel.
  1. Besides a possible short in the logic board, there might be a short in the wall button wiring, the wall button, the wired keypad, the garage door opener remote, or there are some other electronic problems.
  1. Your remote may be emitting random signals. This is often a sign that the batteries are almost worn out, or that your remote is defective.
  1. Believe it or not, it’s true: A CB radio, police radio, local radio station, or radio tower can all make a garage door close and open all by itself.

Do It Yourself

There are additional issues you can probably solve on your own. If your garage door ever goes on the fritz, there are many possibilities for the troubles you’re encountering:

Does your garage door not open with your remote? There are several reasons for this problem. 1. You could be out of range from your garage door. 2. Maybe you need to recharge or replace the batteries. 3. The garage door motor’s antenna is possibly damaged, or it is blocked from the signal. 4. Your remote requires reprogramming.

Does the garage door opener run a few seconds, yet it turns off? Often this will occur on older garage doors. The garage door is closed, and the garage door motor attempts to lift it, yet it still won’t budge. First, examine the springs. If the springs are not broken, then inspect the track for any tiny obstacles or grime. If neither of these is the issue, check to see if your garage door is the type that has a built-in lock that’s unintentionally engaging.

Does your garage door opener run, but the garage door still doesn’t open? If there’s a power outage, your garage door opener has a disconnect switch, so that you can open or shut your garage door manually. This switch is generally attached to a knob or rope, which can sometimes mistakenly come unhooked. Close or open your garage door all the way, and then securely reattach the hook. Now your transmitter should return to normal.

More Complicated Issues, Requiring Expert Attention

Does your garage door go only part of the way down, yet open again? A garage door is designed with a reversing mechanism to keep it from crushing an object in its path. The reversing instruction is triggered by any item that’s blocking the garage door’s path ~ a garbage can, a bicycle, or a box, for example. Another likely possibility is that there is a build-up of debris on the tracks ~ grime or a minute object ~ which prevents the rollers from moving. For proper repairs, you’ll need the expertise of a garage door repair professional in Mcdonough.

Did your garage door slam down, making a loud bang? You probably have a broken garage door spring, which isn’t properly offsetting the garage door’s weight. Or, the cables could be broken. Either way, this is serious. Call a garage door repair technician.

Your garage door track might have gotten out of alignment. This is also a major problem. When the metal track isn’t in alignment, the garage door won’t move at all. Look closely for any gaps between the rail and the rollers, and find out whether there are any bends in the rails. The garage door’s substantial weight will eventually worsen all these issues, so don’t procrastinate! Your garage door is bound to grow increasingly dangerous. It’s time to hire a garage door repair expert.

It’s not a good idea to attempt to adjust the garage door yourself, unless you’re an engineer! If your garage door is not properly serviced, the garage door springs can go directly through the wall! What’s more, there’s the possibility of serious injury, and even death. The garage door cables, bottom brackets, and drums probably require adjusting also. It’s just not worth it to take any avoidable risks. Unless you already know what you are doing, then your best bet will be to hire a local garage door repair specialist. If you live any place in McDonough, Georgia, then you ought to consider a reputable garage door technician you can rely on, such as a garage door repair mobile specialist on staff at McDonough Garage Door Repair, where free consultations are available.




Aricle source here: DOES IT SEEM LIKE YOUR GARAGE DOOR HAS A MIND OF ITS OWN? HERE’S WHAT TO DO!

Friday, March 3, 2017

Garage Door Won’t Open or Close With Remote Control

McDonough Garage Door Opener InstallationThe convenience of a garage door remote control just can’t be disputed. People who are able to use their remote to operate the door enjoy ease that can’t be beat. Remember when you used to have to get out of the car, bend down, and physically exert energy to lift open the garage door? These days are long over. You no longer have to strain yourself to close or open the garage door!

But if you are in a situation in which your remote control is failing to work properly, then you know how frustrating it can be. Maybe you can’t figure out why your garage remote won’t work. The team at McDonough Garage Door Repair provides services to locals in McDonough, Georgia and they are here to make sure you have all of the information that you are looking for. This will save you from potentially spending money on a service that you don’t need, and it will hopefully simplify the situation for you. Issues could range from a garage door motor’s broken antenna, which might not be getting the right signal, or it could be something simple like a dead battery. Here, you will find everything that you want to know – perhaps the solution is quite easy!

If your garage door will not open or close using the remote control, have a look at these scenarios which may help you:

  1. Have a look at the batteries. Do they look like they could be problematic? Are they swelling inside of the remote? Have you checked to ensure they are not dead? If you have done these things, and they don’t appear to be the problem, notice if your remote works while you are standing inside of the garage. If this is the case, then you might want to consider a universal garage door opener receiver which will extend the range of the remote control.
  2. Consider if the issue is a communication problem. This might be the case if the opener system is working, but the opener is not receiving the right signal. Try the garage door button located on the wall to determine if this is the cause for concern. This, of course, is assuming that you’ve already made sure the remote’s batteries are not dead. While in the garage, does the remote control work correctly? If you utilize another remote, does the issue change? A remote that only works while inside of the garage indicates a broken antenna wire. Moving the antenna around a bit might solve the problem. If not, it could be the receiver. The receiver can be found on the opener. Problems with radio transmitters are best handled by professionals who know what they are doing. Why? Because there are electrical components that could end up being damaging. So, see to it that the communication problem isn’t just that the remote control’s battery is dead – if it is something else, contact an expert.
  3. Did you know you can use your smartphone to operate your garage door? Many openers can be set up to your smartphone. If you do this, you might never have to even worry about remote control problems again.
  4. Check to make sure you didn’t accidently activate the lock button. This button is there for security and safety, so people often times turn them on when they leave for vacation, knowing they won’t be home. Activating this button means the remote will not work at all. Did you turn it off and forget about it? Or perhaps shut it off by accident? See if this is the case before spending money on an expert’s services.

If you have a garage door that refuses to respond to its remote control, then try these steps before calling an expert. You might find that the solution was quite simple. Other options include buying a new garage door opener, or purchasing a brand new garage door opener receiver. You can buy a safety beam if needed as well. But if you have questions on what the issue actually is, an expert will be able to point you in the right direction. McDonough Garage Door Repair would be happy to assist you if you are in this part of Georgia, but make sure to do your research if you are hiring someone somewhere else. You want to make sure that the company you hire has good reviews, answers all of your questions, is licensed and insured, and is available when you need them. Many garage door repair services offer 24/7 assistance for problems that just can’t wait. You will find a great deal of convenience at your fingertips when you are searching for a company to assist you. It is recommended that you ask for reviews and references – if your neighbor recently hired a business in your area to help with garage door problems, ask them what they thought – were the prices fair and provided upfront? Did the expert answer all questions with professionalism? Did they test the door to make sure it worked upon carrying out the services? These are all things to ask about.

It is a given that you must be cautious when you are handing your garage door and its many parts. Some parts are more dangerous to work with than others, and sometimes, a small mistake can end up causing a whole lot of damage. Be careful when working with your garage door, but keep in mind that you should always check the basics to make sure the problem is actually as serious as it might appear to be. Hopefully you found that this information has saved you money or at least provided the guidance that you need to hire the right person for assistance. Good luck with your remote control! Take these steps to get things back “under control” – no pun intended! Thanks for checking out what to do when a garage door won’t open or close with the remote control.




Aricle source here: Garage Door Won’t Open or Close With Remote Control